We can see a wide range of acrylic products in various shopping malls. These acrylic products are also extremely careful in the production process. If it is impossible to deform the acrylic products, how can we prevent this? What happened? Here is a brief explanation from the acrylic products manufacturer Jiayimei.
1. When making, choose an appropriate thickness of acrylic sheet to avoid bending deformation.
2, must be considered to have a certain amount of expansion space when installing.
3. Avoid scratching during the process of processing.
4. The heat distortion temperature of the acrylic sheet is about 100 degrees, and the continuous use temperature should not be higher than 90 degrees.
The above four points are the key points we should pay attention to when making acrylic products. When we use large-size acrylic sheets, we must increase the thickness to prevent the sheet from sagging due to its own weight. Thermoforming can improve the impact strength. The type of acrylic products should be made of acrylic sheet with suitable weight. It should not be too thick or too thin, so as to avoid the deformation during the production process due to the non-conformity between the bearing capacity of the sheet and the product.